With cutting-edge Dual PCI architecture, Ultra160 LVD SCSI host bus and cache memory up to 512MB, the new Arena Indy-2230 is the smart choice for small mid-sized businesses and digital content creators.

The Arena Arena EX3 RAID delivers unparalleled storage flexibility, management, configuration simplicity, and storage flexibility, while ensuring maximum protection for your business.

All Arena RAID units come standard with 3 years, parts and labor warranty.

Key Features
The Arena EX3 offers high throughput and superb reliability due to it’s new Dual PCI on-board chipset.

As all Arena RAID solutions, the Arena EX3 is designed to simplify complicated and time consuming operations. Compared to the conventional disk array, which is designed for experienced IT professionals, Arena comes with the innovative Plug-N-Play RAID. Just attach to your host server and Arena is up and running after following the step-by-step built-in setup program and a user interfaced button on the front panel.

The high availability hardware and firmware architecture automatically detects bad sectors and failed disk drives. When installing a replacement disk or using a hot spare disk, the system automatically rebuilds data without keyed in commands or functions.

An LCD panel Display a comprehensive operating status. Upon failure (HDD) the built in buzzer sounds and LCD panel indicated the failure status simultaneously. With the system on, remove and install hot swap components without interrupting data access.

The Arena series RAID is completely operating system independent and transparent with Windows based OS, Linux, Novell, UNIX, or Mac based servers.

Specifications

• In-Built Controller:
  Intel i80303 RM RISC Microprocessor up to 160 MB/s transfer rate. ECC equipped.
• Cache Memory:
  64~512MB SDRAM (Industry standard 144 pin 133mhz SO-DIMM SDRAM)
• RAID Levels:
  0, 1, 0+1, 3, 5 and JBOD
• Interface
  Host Bus:
  Ultra160 LVD SCSI
  Disk Bus:
  Ultra ATA-100
• Drives:
  Hot swapable>
  Up to six 3.5 inch E-IDE drives (1” height)
  Support Big Drive HDD (200GB+)
• Maximum Fault Tolerance Capacity:
  > 1TB
• Host Requirement:
  Host Independent and Transparent
• Power Supply Capacity:
  250W
• AC Input Voltage:
  110 / 220V (+/-10%), 60 / 50 Hz
• Dimensions:
  350 (H) x 175 (W) x 310 (D) mm
• Relative Humidity:
  10% to 85% Non-condensing
• Operating Temperature:
  5 C~40 C
• Weight:
  11.5 kgs (without Disk Drives)